Ladder Logix Pvt Ltd
Magnetic linear XY axis for diamond laser machines
A direct-drive linear motor stage built into CVD diamond processing machines — sawing, slicing, pie cutting and shaping — where the position of the head decides the value of the stone.
Application film
See it working
The application
Inside the diamond machine
The stage carries the optics over the stone. One axis sweeps X, the plate above carries Y, and together they place the beam anywhere in the working field for multi-pie, auto-pie, sawing, slicing and shaping work.
Multi-pie & auto-pie cutting
The head is driven straight to each programmed point, so pie geometry repeats identically across the whole plate.
Single & double-side sawing
Point-to-point moves settle fast and hold position while the laser works the kerf.
Slicing & shaping
Position is read by the linear encoder on the axis itself, so the cut plane stays where it was commanded.
The motion
X and Y, one system
Every point in the working field is reached the same way: the linear encoder reads the true position of the carriage and the motor corrects it directly. There is no nut, no coupling and no belt between the command and the movement.
The stroke is set to your machine — the axis is supplied in long-stroke form, and U-channel and flat types have no stroke limit by design.
How it works
The motor is the axis
Direct Drive
Electrical energy is converted into linear motion with no coupling mechanism between motor and load.
Zero mechanical backlash
There is no screw or nut in the drive train, so reversal costs no lost motion.
No drive contact wear
Without a ball screw there is no contact wear in the drive, and the system stays simple with fewer parts.
Technical specification
Data sheet
| Drive principle | Direct-drive linear motor (no coupling mechanism) |
|---|---|
| Feedback | Linear encoder — position read on the axis itself |
| Speed | Above 5 m/s |
| Acceleration | Above 5 G |
| Backlash | Zero |
| Stroke | Long stroke; unlimited stroke on U-channel and flat types |
| Flat type ECM-PF | Continuous thrust 121 – 999 N · peak 363 – 2908 N |
| U-channel ECM-PU | Continuous thrust 63 – 562 N · peak 259 – 2338 N |
| Shaft type | Continuous thrust 21 – 352 N · peak 87 – 1380 N |
| System | Controller + driver + linear motor + linear encoder |
Values taken from the supplied linear motor system data sheet. Flat type is selected for point-to-point work such as laser cutting; U-channel type for continuous motion. Final selection is made against your payload, stroke and cycle time.

