L A D D E R L O G I X

Loading....

At Ladder Logix, we are driven by innovation and committed to excellence in industrial automation.

Ladder Logix Pvt Ltd

Magnetic linear XY axis for diamond laser machines

A direct-drive linear motor stage built into CVD diamond processing machines — sawing, slicing, pie cutting and shaping — where the position of the head decides the value of the stone.

Speed
> 0 m/s
Acceleration
> 0 g
Backlash
0
Speed
0 s
Application film

See it working

Real application footage of the CTPS linear motor XY assembly operating inside the machine.
The application

Inside the diamond machine

The stage carries the optics over the stone. One axis sweeps X, the plate above carries Y, and together they place the beam anywhere in the working field for multi-pie, auto-pie, sawing, slicing and shaping work.

Multi-pie & auto-pie cutting

The head is driven straight to each programmed point, so pie geometry repeats identically across the whole plate.

Single & double-side sawing

Point-to-point moves settle fast and hold position while the laser works the kerf.

Slicing & shaping

Position is read by the linear encoder on the axis itself, so the cut plane stays where it was commanded.

180 mm
Y
X
X 0.0 mm Y 0.0 mm
The motion

X and Y, one system

Every point in the working field is reached the same way: the linear encoder reads the true position of the carriage and the motor corrects it directly. There is no nut, no coupling and no belt between the command and the movement.

 

The stroke is set to your machine — the axis is supplied in long-stroke form, and U-channel and flat types have no stroke limit by design.

How it works

The motor is the axis

A linear motor converts electrical energy straight into linear mechanical motion. Compared with a rotary motor and ball screw, there is no coupling mechanism in between — better response, no drive contact wear, and no mechanical backlash.

Direct Drive

Electrical energy is converted into linear motion with no coupling mechanism between motor and load.

Zero mechanical backlash

There is no screw or nut in the drive train, so reversal costs no lost motion.

No drive contact wear

Without a ball screw there is no contact wear in the drive, and the system stays simple with fewer parts.

Technical specification

Data sheet

Drive principleDirect-drive linear motor (no coupling mechanism)
FeedbackLinear encoder — position read on the axis itself
SpeedAbove 5 m/s
AccelerationAbove 5 G
BacklashZero
StrokeLong stroke; unlimited stroke on U-channel and flat types
Flat type ECM-PFContinuous thrust 121 – 999 N · peak 363 – 2908 N
U-channel ECM-PUContinuous thrust 63 – 562 N · peak 259 – 2338 N
Shaft typeContinuous thrust 21 – 352 N · peak 87 – 1380 N
SystemController + driver + linear motor + linear encoder

Values taken from the supplied linear motor system data sheet. Flat type is selected for point-to-point work such as laser cutting; U-channel type for continuous motion. Final selection is made against your payload, stroke and cycle time.